Benefits
- Position two LCDs at the point of need, then push them back out of the way when not in use
- Touch-screen stability
- Cable management system routes and conceals cables under the arm
- Accommodates various display sizes; slide screens into place to align edges
- Rugged steel construction
- Extends out 23″ (58 cm) or folds back to 5.7″ (14.5 cm) from wall in storage position
- Rotate screens to view in either landscape or portrait mode
Specifications
Part Number: 45-231-200
Description: 200 Series Dual Monitor Wall Mount Arm (black)
Includes wall mount bracket, 2 extensions, crossbar and 2 sliding LCD mounts, fasteners for wood stud or concrete wall, attachment hardware
Fasteners for direct attachment to metal studs are not included. When attaching to wall supported with steel studs, the Steel Stud Wall Mounting Kit (60-591-003) is recommended
Attaches directly to sturdy vertical surfaces. When extra support is needed, order a Wall Plate or Wall Track accessory (Wall Track also requires separately ordered bracket 97-091)
† Maximum outside width of display is 21.25″ (54 cm) when displays are 2″ (5 cm) thick. This is typically the horizontal dimension of a 22″-diagonal screen-size monitor. Actual allowable width of displays will vary slightly depending on display thickness
* Weight Capacity: 13 lbs (5.9 kg) per mount, 26 lbs (11.8 kg) total. Note:
Monitors must be equal in weight or ±1 pound (.45 kg)
Monitor depth greater than 3″ (7.5 cm) may diminish capacity
Install display mounts on the bow at +2.5° or -2.5° angle to optimize viewing conditions
Monitors are installed with 8° inward off-set angle, creating a 16° viewing parabola for better sight lines
Mounting Standards: VESA FDMI, MIS-D, 75/100, C (hole patterns = 100 x 100 mm and 75 x 75 mm)
Durable, easy-to-clean powder-coated painted steel exterior
Shipping Dimensions: 5.25″H x 13.75″W x 24.25″D (133 x 349 x 616 mm)
Shipping Weight: 11.8 lbs (5.3 kg)
Warranty: Five years